Can't connect the controller?
Source:Longtian
Time:2019-11-28 03:11:30
Clicks:279
Solution:
This problem may be caused by the following reasons:
it may be that the emergency stop switch is triggered to check whether the emergency stop switch is operating normally; the
power supply is not connected, check the power supply.
Check the line for the problem of the line; if the
IP address has been changed, whether the IP address has been changed.
This problem may be caused by the following reasons:
it may be that the emergency stop switch is triggered to check whether the emergency stop switch is operating normally; the
power supply is not connected, check the power supply.
Check the line for the problem of the line; if the
IP address has been changed, whether the IP address has been changed.